Future Automation PICSIDE - Manual (Page 10)

In
st
al
la
ti
o
n
:
S
ta
ge
5
Page 9 of 20 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
PIC SD - Picture Side Mechanism

When mounting the
moving panel brackets
make sure to allow
10mm clearance from
the back of the panel to
the wall as shown
above.
10mm
Fitting the Moving Panels to the Mechanisms
To make sure the moving panel doesn’t fall
off the mechanism attach the moving panel
brackets as shown.
To alter the level of the moving
panel adjust the height of these
bolts which the moving panel
brackets sit on.