Future Automation PICSIDE - Manual (Page 8)



In
st
al
la
ti
o
n
:
S
ta
ge
3
Page 7 of 20 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
PIC SD - Picture Side Mechanism
Final Mounting Fixings
Be sure to use as many fixings through the various slots as possible. Move the frame
left to right to gain access to the top and bottom mounting slots.
Make sure the mechanisms
are fixed securely and safely.
- THE CONTROL BOX MUST BE IN AN EASILY ACCESSIBLE LOCATION
- Wire up the control box, refer to page 13 Electrical Connection
- Connect the control box to the mains power supply
- Connect the infrared remote sensor even if you are going to
use switch control
- Cables can be easily extended
Control Box Setup
Various fixing slots