Junger Audio D*AP8 Digital Audio Processor - Manual (Page 15)

D*AP8
13
Operating – menu structure of the X*AP RM 1 remote panel – menu tree
Power Up Display
<MENU> opens X*AP RM 1 remote panel IP setup menu. See extra manual for details.
<Address> Setup
<Netmask> Setup
<Gateway> Setup
< empty >
Device 1 Setup IP & ON / OFF
Device 2 Setup IP & ON / OFF
Device 3 Setup IP & ON / OFF
Device 4 Setup IP & ON / OFF
<ESC> back to power up display
<connect> will connect with that particular D*AP8 and opens the main operating display:
Hotkey #
1 user defined
2 user defined
3 user defined
4 user defined
5 user defined
6 user defined
7 user defined
8 user defined
<ESC> will jump back to power up display
<MENU> opens operating displays:
Hotkey #
1 <empty>
2 <Audio Processor page 1/2>
<Audio Porcessor page 2/2>
<Input> <Aux Input>
<Upmix> <monitor>
<Spectral Signature> <empty>
<Equalizer> <empty>
<Dynamics> <empty>
<Voice Over> <empty>
<Level Magic> <empty>
<Otput> <empty>
3 <empty>
4 <EBU R128 Meter>
5 <empty>
6 <empty>
7 <empty>
8 <empty>
<ESC> back to main operating display