Junger Audio T*AP Television Audio Processor Edition - Manual (Page 45)

T*AP
41
setup GUI – AUDIO PROCESSOR – Filter – Spectral Signature
Spectral Signature is a dynamic multiband filter. It is rendered on the T*AP DSP :
Link
defines the coupling of the
control circuits (see Input).
Spectral [Enable / Disable]
Signature it must be enabled here in
order to run the filter.
Note each preset contains a
reference curve
- The Signature -
For each preset you may
attach a note to describe the
feature of that Signature
mask.
To set up this application and to display the momentary behavior of it, you must run the Junger
Application Manager J*AP, in order to connect it with the program channels which are processed by
Spectral Signature. The application manager may be downloaded from the Junger website :
www.junger-audio.com/download/soft-firmware
You must enter the IP address of the device and press <Connect> afterwards. The Application
Manager will gather necessary information from the device and will display the IP address, the device
name and the programs including the channels which are used by the respective program.
If you highlight a program that is enabled for Spectral Signature the soft button
<Spectral Signature> becomes active.