Junger Audio C8621- Dolby® D/D+/E Decoder & Metadata Generator - Manual (Page 7)

digital audio
modular
processing system
C8000
Dolby
®
E / D / D plus decoder
C8621
Page 7/19
DOLBY METADATA Since the C8621 also offers a metadata generator a bank of 16
presets to recall Dolby metadata parameters is implemented.
Load [1: "name" … 16: "name"]
Select a preset by number/name and press <LOAD NOW>.
The preset number and name loaded will automatically appear in
the Save as # and Name field below.
Programs loaded
[Prog 1 – preset name xy … Prog 4 – preset name xy / common]
from preset Shows the preset name and number [xy] from which the
respective program metadata or common ones (e.g. Dolby E
frame rate, program configuration etc) have been loaded.
Initially the preset names and numbers are empty, represented
by a dash.
Important Note! The metadata structure of the c8k system is defined for a maximum number of four
supported programs. I.e. the metadata generator will generate up to four independent sets of metadata
for a RDD6 compliant stream. If derived from the Dolby decoder the generator will enter the reversion
mode if the number of programs of the Dolby E stream received does not match this definition.
Save as # [1 … 16]
You must elect a preset memory number where you would like to
save the actual metadata parameters.
Name [16 character ASCII text]
Assign a name to the preset you are about to save here.
Programs to include Tick the check box(es) for which program this preset shall be
in preset saved and press <SAVE NOW>.
The number and the name appear automatically in the "Load"
fields as well because they are active now.
DECODER SETUP
Refers to the DECODE pane
Load [17: "name" … 32: "name"]
Select a preset by number/name and press <LOAD NOW>.
The preset number and name loaded will automatically appear in
the Save as # and Name field below.
Save as # [17 .. 32]
Select a preset memory number where you
would like to save the actual audio program parameters.
Name [16 character ASCII text]
Assign a name to the preset you are about to save
(up to 16 digits) and press <SAVE NOW>.
SETUP/INPUT BUS ROUTING
Refers to the SETUP / ROUTING pane
(FROM C8000 BUS) A bank of 8 presets to recall device settings.
Load [33: "name" … 40: "name"]
Select a preset by number/name and press <LOAD NOW>.
The preset number and name loaded will automatically appear in
the Save as # and Name field below.
Save as # [33 … 40]
Select a preset memory number where you would like to save
the actual audio program parameters.