Junger Audio C8611 - Dolby® E encoder - Manual (Page 11)

digital audio
modular
processing system
C8000
Dolby
®
E encoder
C8611
11/13
PROG. METADATA :
Setup of Dolby Digital Metadata
example below shows 2 programs (5.1 & stereo) :
The PROG.METADATA are used to set up the Dolby D encoder and control the Dolby D decoder
at home.
A lot of these Metadata are applicable only for surround programs.
The table on the next page is an example for 2 programs. The possible Data Rate depends on the
Channel Mode (some channel modes require a minimum Data Rate).