Junger Audio C8685 - Audio Delay - Manual (Page 8)

digital audio
modular
processing system
C8000
8, 4, 2 Channel Audio Delay
C8685
8/11
Initialize and Restore
<INITIALIZE> restores the factory default values for all
Factory Defaults parameters of the module including all presets. The input bus
assignment will be set to S01 … S04, The outputs are turned
OFF and the bus drivers will be disabled.
Backup Settings and
<BACKUP> will put all active parameters and the content of all
Presets to File presets into an XML file. You may store such file on a PC.
Restore Settings you may select a matching XML file from a PC.
and parameters from File <RESTORE> will overwrite all active parameters and the content
of the presets by the content of the backup file.
PARAMETERS
The display here depends on the Channel Mode selected on the SETUP / ROUTING pane. This
example shows the delay configured for 8 independent channels.
Delay (ms) [0 … 1359ms] 8ch mode / [0 … 2724ms] 4ch mode /
[0 … 5455ms] 2ch mode
coarse setting of the delay time.