KBC Networks MCG1-S2-BS - Manual (Page 7)

Manual-MCG1-Rev1204.pdf
Page 7 of 8 www.kbcnetworks.com
Copyright © KBC Networks Ltd.2012
LED Labeling:
Please affix the provided LED labels to the slot to which the card is inserted.
LEDs Definition:
POWER: On if Power Supply is plugged in.
FIB: Lit when fiber link is established and no traffic is detected.
100M:
LAN 100Mbps Speed Indicator. Lit only when link speed is 100Mbps.
1000M: LAN 1000Mbps Speed Indicator. Lit only when link speed is 1000Mbps.
L/A: Lit when copper link is established and no traffic is detected.
Blinks when copper link traffic is transmitted or received.
DUP: LAN Full duplex Indicator.
An unlit LED means half duplex mode, and a lit LED means full duplex mode.
2.3 Caution
• Switch off all power supply before installation.
• Ensure fiber is properly aligned to the receiving connector. Avoid forcing in the fiber.
• The POWER LED is on if the device is under power and operational.