KBC Networks ESUL5 - Manual (Page 7)

Ethernet Switch User Manual
Manual-ESUL5_Series_HW-Rev0611A
Copyright © KBC Networks Ltd. Page 7 of 15 www.kbcnetworks.com
2.3
Installation Method
2.3.1 DIN Rail Mount
 Remove all packaging material.
 Attach the device to a DIN rail.
 Attach copper cables as required.
 Insert the male power block (attached to the supplied in-line PSU) to the
female power socket on the device and tighten the terminal locking screws
using the flathead screw driver provided.
See Section 2.7 for LED status.
Figure 2.1 Dimensional drawings for DIN Rail mounting (mm)
30
PWR PWR