KBC Networks 3U Chassis Transceiver - Manual (Page 21)

Manual-FD＿BSeries-Rev1008.pdf Page 17 of 34 www.kbcnetworks.com
Copyright © KBC Networks Ltd.
On if no link continuity.
V1: ; Video. On if video output is OK.
Off if no video present.
V2-V4: Video. Not used.
4.2 Video Multiplexer Receiver
Connectors:
FIB: Fiber Optic.
V1-V4: Video Output, BNC.
V1-V4: Video Output, DB9 . DB9 Pins assignment as below:
VIDEO1 Channel 1 Video, output
VIDEO2 Channel 2 Video, output
VIDEO3 Channel 3 Video, output
VIDEO4 Channel 4 Video, output
GND Common Ground of Channel 1~4 Video.
LEDs Definition:
POWER: Power Supply. On if power input is OK.
Off if no power present.
FIB: Fiber Link. Off if link continuity is good.