KBC Networks FDVA4-S4R-WSC - Manual (Page 4)

Manual-FDVA4-Rev1008.pdf Page 4 of 9 www.kbcnetworks.com
Copyright © KBC Networks Ltd.
GENERAL
Operating Temperature
-40 ~ 70˚C / -40 ~ +158ºF
Relative Humidity 0 ~ 95% non-condensing
Receiver Power Supply Adaptor
Input: 100~240VAC, 50/60Hz,0.5A
Output: +12VDC, 2A
Mean Time Between Failure (MTBF) > 100,000hrs
Enclosure Color
Silver
Receiver Dimensions ( L x W x H) 155mmx115.5mmx36mm / 6.10”x 4.55”x1.42”
1.3 Warranty
„
Repair
Please contact your local distributors when product is defective. Please apply RA in
advance and prepay shipping cost when returning the defective product to us. We
will pay the cost for sending it back to you.
Please attach a statement clearly describing the problem.
„ We will repair defective product under warranty free of charge to our customer.
„ 5 years warranty for product only.
„ Any unauthorized modification of hardware and software voids the warranty.
„ Warranty does not cover mishandling and/or abuse of the product.
Products comply with the following Safety Label for International Fiber Communication
Equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful Interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at this own expense.
Warning
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.