KLING & FREITAG K&F SONA 8 - Manual (Page 10)

User's manual K&F SONA 8
KLING & FREITAG GMBH © 2014 Version 1.1 Page 10 of 21
1.
Loosen the screws on the cover on
the rear side of the speaker with a
2.5 mm Allen key.
Remove the cover.
A
2.
Connect the safety to the safety eye
in the speaker using the chain quick
link.
Connect the speaker via the
Speakon plug or the Phoenix
connector.
First lay the safety and then the
speaker cable in the feedthrough
slot on the cover.
Speakon/
Phoenix
Safety
3.
Place the cover back onto the rear
of the speaker.
Mount the cover onto the rear side
of the speaker.
The speaker is now prepared for
wall, ceiling or stand mounting.
Speakon/
Phoenix
Safety