KLING & FREITAG K&F SONA 8 - Manual (Page 12)

User's manual K&F SONA 8
KLING & FREITAG GMBH © 2014 Version 1.1 Page 12 of 21
5.
The speaker is now completely
mounted and connected tightly to
the wall.
Now adjust the speaker.
To do so, loosen the hexagon socket
screws at the ball joint arm, as
described on page 9.
5. Stand Installation
To mount a SONA 8 speaker on a stand, you need the accessory Stand socket M10.
1. For stand mounting, you do not need the provided long nuts. Unscrew them from the
mounting arm and keep them for possible later use.
2.
Turn the counter nut entirely onto
the thread of the mounting arm.
Stand socket M10
3.
Screw in the counter nut M10
against the Stand socket M10 using
a 17 mm spanner.
4.
Loosen the clamp screw on the
stand adapter and place the
speaker with the stand adapter
onto the top end of the stand.