KLING & FREITAG K&F CA 106 - Manual (Page 7)

User's Manual CA 106
KLING & FREITAG GMBH ©1995 - 2006 Version 5.1, 09.11.2006 Page 7 of 26
2. CA 106 Product Descriptions and Versions
Short description:
Compact 2-way full-range loudspeaker system with 6.5" low-mid chassis and 1" high
frequency horn on a rotatable 90° x 60° CD horn. Homogeneous coverage and con-
stant directivity starting at 1.5 kHz. Integrated crossover with self-resetting protection
circuit for low-mid and high frequency way.
Enclosure:
Trapezoidal enclosure with monitor and cluster angles, 12 mm birch plywood, highly
stressable structured black, grey or white finish, 2 x M6 and 8 x M8 thread inserts,
compatible with various mounting accessories, highly permeable, ball proof steel grille
with exchangeable black acoustic foam.
The CA 106, with its compact construction and, at least in the standard version, its
light weight, is eminently suitable for mobile use, where it has already proved itself. Its
discreet design also makes the CA 106 suitable for fixed installations.
Special versions:
− CA 106-100V: Version with 100V / 50 VA / 100 VA / 150VA toroidal transformer
− CA 106 ‘Outdoor Installation'
− CA 106 ‘Outdoor 'Mobile'
− CA 106 'shielded', magnetically shielded, equipped with lightweight Neodymium
chassis
− Special finish in RAL colours
3. Important Notes for the Option ‘Outdoor Mobile’
The CA 106 is available with the option ‘Outdoor Mobile’.
Speakers with the option ‚Outdoor’ have been optimised for outdoor use. They with-
stand temperature fluctuations in moderate climate zones and do not accumulate con-
densation water.
In order to guarantee the longevity and safety of the speakers, the speakers with the
option ‘Outdoor’ must still be protected from direct effects of the weather.
They should be installed, for example, under a roof so that they also have sufficient
protection from driving rain from the side and direct sunlight.
3.1 Features of the Option ‘Outdoor Mobile’
Version for mobile outdoor use under roofs.
Features like standard version but with the following extras
− multi-layered, temperature and UV-resistant high-tech PU marine primer,
− final coating with highly resistant structured 2K paint in RAL colours,
− waterproofed diaphragms and electronic components protected against cor-
rosion with protective coating.
Warning