Firmware version, Firmware update, Test alarm tones – Monroe Electronics 988 User Manual

Page 10: Restore factory default

Advertising
background image

10

Firmware Version

Display the firmware version in the 988.

Firmware Update

Downloads the firmware to the 988. This is for future updates.
You can acquire the firmware from Monroe Electronics. Then
click on this menu and follow instructions to download it to the
unit’s flash memory.

Test Alarm Tones

Sends a continuous tone for system level adjustment.

Restore Factory Default

Enters the default setup on screen.


Main Screen
The following settings must be programmed and stored into the 988.

Number of Rings to answer __ 1-8.

Access code ___
Upon telephoning the unit, a 3-digit code must be entered to
access the unit.

Station ID ___ Identification of the station that broadcasts the message.

Duration ___ The valid time period of the message. In 15-minute increments if
less than 1 hour, in 30-minute increments if more than 1 hour.

Originator ___ Identifier for which site or station created and transmitted the EAS
message. There are five options that can be set:

Broadcast/Cable System___ EAS
Civil Authorities___ CIV
Emergency Action Network___ EAN
National Weather Service___ NWS
Primary Entry Point___ PEP

Event___ The nature of the event or EAS message. This selection determines the
text that will be displayed to the customer.

Advertising