Monroe Electronics CMPlus - Manual (Page 5)

3
Operation
Creating your Message – Log into the One-Net, go to the Encoder tab, Select Send EAS,
and click on the Custom Message tab. The following screens show the information you
need to input for your Custom Message.
Message Type Control – There are three choices for Message types that can be
selected. In most Applications the Non EAS custom message setting will be used.
Set Message Max Active Duration – The value is only used if sending out a CEM
or ADR message.
Custom Text Message – Type the message that you want to send out in this box.
If you would like to save the message, you can type a file name in the box provide
and click on the Save Text to File button.