Monroe Electronics CMPlus - Manual (Page 8)

6
CMPlus Activation Instructions
1. Log into the One-Net - Using your password your user name and password.
You should be directed to the page you were at last time you logged in. If not,
Click on the Encoder tab, select Send EAS, and click on the Custom
Messaging tab.
2. Create your Message - Once you are at the Custom Messaging page you
have a couple of choices. You can either select an alert message that you
created previously or create a new message.
2.1. If you selected a previously created message you can skip to step 5.
2.2. If you are creating a new message, type it in the box provided.
3. Text to Speech – If you want to have the One-Net convert the text you have
typed in the box to speech you can place a check mark into this box. This
conversion will be played out with the text message you typed. If you don’t
want to use this feature you can play out a .WAV file that was previously loaded
into the One-Net.
4. Message Display Control – Select the desired display control setting.
5. Send Custom Message – Click on this button and you see a review of the
message details. If you want to send the message out click on the Yes Start
Message button. If you want to change the message you can click on the
Cancel Send Message button and make the changes you want.