NEXCOM NISE 103 User Manual
Page 63
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
50
Chapter 4: BIOS Setup
NISE 103 User Manual
USB Mass Storage Device Configuration
Configures the USB mass storage class devices.
Number of seconds
POST waits for the
USB mass storage
device after start unit
command.
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← →
Select Screen
↑↓
Select Item
+-
Change Option
F1
General Help
F10 Save and Exit
ESC Exit
USB Mass Storage Device Configuration
USB Mass Storage Reset Delay [20 Sec]
Device #1 USB Hotplug FDD
Emulation Type
[Auto]
Advanced
USB Mass Storage Reset Delay
Selects the number of seconds POST will wait for the USB mass storage
device after the system starts.
Device #1
Displays the connected device.
Emulation Type
Auto
USB devices that are less than 530MB will be emulated as
a floppy drive and the remaining as hard drives.
Forced FDD
Forces an HDD formatted drive to boot as FDD (e.g. ZIP
drive)