NEXCOM APPC 1230T - Manual (Page 113)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 97 APPC 1230T/1231T/1235T/1530T/1531T/1730T/1731T/1930T/1931T User Manual
Chapter 4: BIOS Setup
Onboard Serial Port Max Baud Rate
This field configures the maximum baud rate of the serial port 2, the options
are 115200 bps and 921600 bps.
Save & Exit Advanced Chipset Boot Security Main
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Change the Serial Port Max Baud
Rate. Select <115200 bps> or
<921600 bps>
Serial Port 2 Configuration
Serial Port
Device Settings
Change Settings
Onboard Serial Port Max Baud Rate
[Enabled]
IO=3E8H; IRQ=7;
[IO=3E8H; IRQ=7;]
[115200 bps]
Onboard Serial Port Max Baud Rate
115200 bps
921600 bps
Serial Port 3 Configuration
This section is used to configure serial port 3.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM) Serial Port 3 Configuration
Serial Port
Device Settings
Change Settings
Onboard Serial Port Max Baud Rate
[Enabled]
IO=2E8h; IRQ=6;
[IO=2E8h; IRQ=6;]
[115200 bps]