Installing a ssd/hdd drive – NEXCOM NViS 3620 User Manual
Page 55
Advertising
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
41
Chapter 4: System Setup
NViS3620/3720 series User Manual
Installing a SSD/HDD Drive
1. The two SSD/HDD bays on the front are used to install 2.5” hard drives.
Loosen the thumb screws and remove the covers.
Note: The following instructions cover how to install a single 2.5” hard
drive, but will also outline the steps to install the hard drive brackets for the
two SSD/HDD bays.
Thumb
screws
2. Insert the hard drive into the drive bay with the SATA data and power
connector facing towards the end. Align the hard drive’s mounting holes
with the mounting holes on the drive bay, and use the provided screws
to secure the hard drive in place.
Mounting
screws
Advertising
This manual is related to the following products: