NEXCOM VTC 6200 - Manual (Page 59)

Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved 46 VTC 6200 / VTC 6200-NI / VTC 6200-NI-DK User Manual
Chapter 3: System Setup
Installing the PCI-104 Module
1. Locate for the PCI-104 slot on the board.
PCI-104 slot
Mounting
stud
2. Position the PCI-104 module above the slot then press it down firmly
until it is completely seated in the slot. This will at the same time align
the module’s mounting holes to the mounting studs on the board.
Mounting
stud
Mounting
hole
PCI-104
module