NEXCOM VTC 6200 User Manual
Page 63
Advertising
Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved
50
VTC 6200 / VTC 6200-NI / VTC 6200-NI-DK User Manual
Chapter 3: System Setup
5. Align the head bolt screws with the mounting studs on the main board
or PCI104 Module. Tighten the head bolt screws to secure the drive to
the chassis.
Mounting stud
Head bolt
screw
6. Locate for the SATA connector and the power connector. on the board.
SATA connector
Power connector
Advertising
This manual is related to the following products: