Removing the fuse – NEXCOM VTC 6200 User Manual
Page 66
Advertising
Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved
53
VTC 6200 / VTC 6200-NI / VTC 6200-NI-DK User Manual
Chapter 3: System Setup
Removing the Fuse
1. Remove the screw of the fuse panel and then remove the panel.
Screw
Fuse panel
2. Use nose pliers to remove the fuse.
Fuse
Nose pliers
Advertising
This manual is related to the following products: