NEXCOM VTC 6201 - Manual (Page 17)

Chapter 1: Product Introduction
Copyright © 2011 Nexcom International Co., Ltd. All Rights Reserved 3 VTC 6201 Series User Manual
Hardware Specifications
Main Chipset
▪
Intel ® ICH8M
CPU
▪
Intel ® Atom™ D510 Dual Core 1.66GHz
Memory
▪
DDR2 667/800 SDRAM
▪
One 200-pin SO-DIMM up to 2GB
Expansion
▪
Mini-PCIe socket (USB) x 1 (for 3.5G module)
▪
Mini-PCIe socket (PCIe + USB) x 1 (for WLAN module)
▪
1 x Bluetooth module (optional)
▪
1 x GPS module
▪
PCI-104 x 1
I/O Interfaces - Front
▪
5 x LEDs for power stand-by (on power button), Power Status, HDD,
HSDPA and GPIO
▪
Power button
▪
2 x USB ports
▪
2 x SIM card socket
▪
1 x system reset button
▪
1 x Mic-In, 1 x Line-Out
▪
4 x mounting holes SMA-type for HSDPA/BT
I/O Interfaces - Rear
▪
8V~60V wide range DC power input, power ignition signal control
▪
Dual VGA output (clone mode)
▪
5V/1A, 12V/1A DC power output, can be controlled by S/W
▪
1 x Mic-In, 1 x Line-Out
▪
Support 2 x RS232 port, 1 x RS-232/RS-485
▪
2 x USB 2.0
▪
1 x LVDS (DB26 female connector for LVDS with backlight, control
power [+12V] and USB 2.0 x 1)
▪
10/100/1000 Fast Ethernet, RJ45 with LED connector x 3 M12
(10/100Mbps)
▪
GPIO x 1 (4 input & 4 output)
▪
RF Antenna Connector Hole Reserved: For RF Coax to SMA Bulkhead x 1
for GPS , signal connects to the function board
▪
FUSE
Expandable Storage
▪
SATA 2.5” HDD Bay x 1
▪
SATA DOM x 1
Power Management
▪
Selectable boot-up & shut-down voltage for low power protection
▪
HW design ready for 8-level delay time on/off at user’s self configuration
▪
Power on/off ignition, software detectable
▪
Supports S3/S4 suspend mode