NEXCOM VTC 6201 User Manual
Page 58
Advertising
Chapter 3: System Setup
Copyright © 2011 Nexcom International Co., Ltd. All Rights Reserved
44
VTC 6201 Series User Manual
Metal bracket
Head bolt screw
4. Now place the SATA drive on the metal bracket then tighten the head
bolt screws to secure the drive on the metal bracket.
5. Align the head bolt screws with the mounting studs on the main board or
PCI104 Module. Tighten the head bolt screws to secure the drive to the
chassis.
Mounting stud
Head bolt screw
Advertising