NEXCOM VTC 6201 - Manual (Page 18)

Chapter 1: Product Introduction
Copyright © 2011 Nexcom International Co., Ltd. All Rights Reserved 4 VTC 6201 Series User Manual
Dimensions
▪
260mm (W) x 176mm (D) x 50mm (H) (10.24” x 6.93” x 1.97”)
Construction
▪
Aluminum enclosure with fanless design
Environment
▪
Operating temperatures:Ambient with air:
-30°C to 60°C (SSD)
-30°C to 50C (HDD)
▪
Storage temperatures: -40°C to 80°C
▪
Relative humidity: 10% to 90% (Non-condensing)
▪
Vibration (random): 2g@5~500 Hz with SSD; 1g@5~500 Hz with HDD
(in operation)
▪
Vibration (with SSD)
▪
Operating: MIL-STD-810F, Method 514.5, Category 20, Ground
▪
Vehicle – Highway Truck
▪
Storage: MIL-STD-810F, Method 514.5, Category 24, Integrity Test
• Shock (with SSD)
- Operating: MIL-STD-810F, Method 516.5, Procedure I, Trucks and
semi-trailers=20g
- Crash Hazard: MIL-STD-810F, Method 516.5, Procedure V, Ground
equipment=75g
Certifications
▪
CE approval
▪
FCC Class B
▪
e13 Mark
Power Management
▪
Power-on delay time is selectable by BIOS to disable and enable in 10sec
/ 30sec / 1min / 5min / 10 min / 15min / 30min / 1hr.
▪
Power-off delay time is selectable by BIOS to disable and enable in 20sec
/ 1min / 5min / 10min / 30min / 1hr / 6hr / 18hr.
▪
S3, S4 suspend mode
▪
Ignition On/Off status detectable by SW
▪
Low battery status detectable by SW
▪
Ignition enable/disable is jumper selectable
▪
Shut down system automatically when the system’s internal temperature
is over 80C.
▪
VTC 6201 / VTC 6201-M will automatically shut down 5 minutes after
the duration of low battery voltage is over 60 sec. User can detect this
situation via software.
▪
If the ignition is off and the system is still on after 3 minutes, VTC 6201 /
VTC 6201-M will shut down automatically.
▪
If the ignition is off, the user can detect this status via the software.
▪
If the ignition is turned on again and the power-off delay is in progress,
VTC 6201 / VTC 6201-M will cancel the delay function and will continue
to operate normally.