NEXCOM VMC 100 - Manual (Page 80)

Copyright © 2014 NEXCOM International Co., Ltd. All rights reserved 66 VMC 100/1100 Series User Manual
Chapter 11: Installing the OBD Module
C
haPter
11: I
nstallIng the
obd m
odule
1. Remove the heatsink.
2. Remove the hole cover.
3. Put the OBD module into the bracket and secure it with screws.
4. Place the adapter board onto the OBD module, please note, the pins on
the adapter board have to be inserted into the OBD module. Once fully
inserted, secure the OBD module with screws.