One Systems PM4-M V4 - Manual

POLE MOUNT SYSTEM PM4/M
INSTALLATION MANUAL
January 2015
The Pole Mount System PM4/M is an easy to install and flexible system designed
to allow ONE SYSTEMS loudspeaker systems to be mounted to pole structures.
The only products approved for use with PM4/M are the 112/HTH, 212/HC,
312/HC, 118/HSB (See Appendix 2 if the 118HSB is used), and CFA-2/HTH.
NO OTHER LOUDSPEAKERS SHOULD BE SUBSTITUTED!
The following actions MUST be performed PRIOR to beginning the installation of
the PM4/M:
1. This installation guide must be completely read and understood
2. The instruction manual “Rigging and Suspension of ONE SYSTEMS
Products” must be read and understood. (This instruction manual is
available at
www.ONESYSTEMS.com in the “Education section of
the web site.
3. The manufacturer of the pole MUST be consulted to verify the
applicability of the PM4/M and ONE SYSTEMS loudspeaker to the
specific pole. The pole must be capable of supporting the weight of
the PM4/M, the loudspeaker enclosure and all associated rigging
and ALSO meet all required safety factors specified by local and
national codes and safe rigging practices. The weight of PM4/M is
16.1 kg (35.5 lb.)
4. The PM4/M loudspeaker should be installed only by one
experienced in the overhead suspension of items and familiar with
the applicable local and national codes governing installation of
these products and also governing the attachment of these products
to the specific pole structure.
5. The installer should be experienced with the use of stainless steel
banding systems and banding system tools.