Presentation Switchers PS550 - Manual (Page 19)

Page 19 Series 500 Installation Guide
Set Stereo / Mono Output Mode Set Stereo / Mono Output Mode
Audio output is set to stereo by default. It is also possible to sum together the le and right
channels into a single mono audio stream for line level as well as speaker.
To begin, ensure that the main default screen is displayed. The main screen displays the current
input and volume level. If this screen is not currently displayed, press the Cancel bu on repeat-
edly un l the main screen is illuminated.
To adjust audio level on a selected input follow these steps:
1. Press the volume control knob once to enter the menu mode.
2. Rotate knob to Output and press knob (or select Input 3 bu on)
3. Rotate knob to Stereo / Mono and press knob (or select Input 2 bu on).
4. Rotate the knob to select the audio mode and press knob. Le and right channels will now
be the same signal.
Set Audio Input Levels Set Audio Input Levels
This feature allows the integrator to a enuate audio levels on select inputs to create a “nomi-
nal” audio level across all inputs.
To begin, ensure that the main default screen is displayed. The main screen displays the current
input and volume level. If this screen is not currently displayed, press the Cancel bu on repeat-
edly un l the main screen is illuminated.
To adjust audio level on a selected input follow these steps:
1. Press the volume control knob once to enter the menu mode.
2. Rotate knob to Input and press knob (or select Input 2 bu on)
MAIN MENU
1.>STATUS
OUTPUT
1.>RESOLUTION
1.>STEREO
2. MONO
MAIN MENU
1.>STATUS
Audio Settings
Press: 2 1
Shortcut
Press: 3 2
Shortcut