Presentation Switchers PS550 - Manual (Page 25)

Page 25 Series 500 Installation Guide
1. Press the volume control knob once to enter the menu mode.
2. Rotate knob to Input and press knob (or select Input 2 bu on)
3. Rotate knob to Auto-Switch and press knob (or select Input 2 bu on).
4. Rotate the knob to select on or off and press (or select Input bu on 1 for On or 2 for Off ).
Command Broadcast On/Off Command Broadcast On/Off
This feature enables/disables the unsolicated broadcast of commands origina ng from the front
panel or auto-switch feature. For example, when a user makes a switch on the front panel the
equivalent RS-232 command is sent out the serial port. This keeps 3rd party controllers no fi ed
when a switch is originates from another source besides the 3rd party controller itself.
To begin, ensure that the main default screen is displayed. The main screen displays the current
input and volume level. If this screen is not currently displayed, press the Cancel bu on repeat-
edly un l the main screen is illuminated.
To toggle the automa c switching feature follow these steps:
1. Press the volume control knob once to enter the menu mode.
2. Rotate knob to Communica on and press knob (or select Input 4 bu on)
3. Rotate knob to CMD Broadcast and press knob (or select Input 3 bu on).
4. Rotate the knob to select on or off and press (or select Input bu on 1 for On or 2 for Off ).
Display Control On/Off Display Control On/Off
This feature enables the Series 500 Display Control feature on or off .
To begin, ensure that the main default screen is displayed. The main screen displays the current
MAIN MENU
1.>STATUS
1. AUDIO LEVEL
2.>AUTO-SWITCH
AUTO-SWITCH
1.>ON
MAIN MENU
1.>STATUS
COMMUNICATIONS
1.>SERIAL RS-232
CMD BROADCAST
1.>ON
Press: 4 3
Shortcut
Press: 4 4
Shortcut