Proceed PVP - Manual (Page 7)

7
Operating Voltage
& Frequency
The PMDT is set at the factory (internally) for 100V, 120V, 200V, 220V, or 240V AC
mains operation as appropriate for the country in which it is to be sold. (230V/
50Hz only in European Union countries, in compliance with CE regulations.)
Make sure that the label on the rear panel of the PMDT (beside the AC input re-
ceptacle) indicates the correct AC operating voltage for your location. Attempting
to operate the PMDT at an incorrect voltage can damage the unit.
The PMDT Modular DVD Transport is also set at the factory for operation on ei-
ther 50 or 60 Hz AC line frequencies, as appropriate for the country in which it is
to be sold. It will not operate if it senses an incorrect line frequency.
Neither the voltage nor the line frequency setting may be changed by the user.
Voltage label
No User Serviceable Components Inside. For service, contact Madrigal Audio
Laboratories or an Authorized Dealer. Any modifications to this equipment will void all warranties.
Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,577,216;
4,819,098 and 4,907,093 licensed for limited viewing uses only.
S/N
designed and manufactured in USA
www.madrigal.com
m o d u l a r D V D t r a n s p o r t
BEFORE ATTEMPTING TO OPERATE THIS
DEVICE, REFER TO OWNER'S MANUAL FOR PROPER
OPERATING INSTRUCTIONS AND SAFETY PRECAUTIONS.
HAZARDOUS VOLTAGE AVAILABLE INSIDE; DISCONNECT
AC ~ MAINS CABLE BEFORE OPENING UNIT.
WARNING:
If the AC mains voltage or frequency indicated on your PMDT is incorrect, please
contact your local, authorized Proceed dealer or distributor.
The PMDT can easily be powered by a normal 15-ampere AC mains line. If other
devices are also powered from the same AC line, their additional power con-
sumption should be taken into account.