Signamax 1000BaseT/SX/LX to 1000BaseSX/LX Converters - Manual (Page 2)

Gigabit Ethernet SFP Media Converter
2
Quick Start Guide
This quick start guide describes how to install and use the Gigabit Ethernet SFP media
converter. The converter introduced here provides a one channel media conversion solution.
Physical Description
Product Overview
This Gigabit Ethernet SFP media converter is a plug-and-play device. Connect the supplied AC
to DC power adaptor to the receptacle on the rear panel of the Gigabit Ethernet media converter,
and then attach the plug into a standard AC outlet with a voltage range from 100 to 240V AC.
DIP Switch
DIP
switch Up (Default Setting) Down
Left-hand
side The fiber port auto detects
full and half duplex Forces the fiber port to full
duplex mode
Right-hand
side Disable LFS Enable LFS LFS:
Link fault signaling
function
The 1000BaseT and 1000BaseSX/LX Connectors
The 1000BaseT
Connection
The following lists the pinouts of the
1000BaseT port.
The 1000BaseSX/LX
Connection
The SFP socket accepts standard Gigabit
Ethernet Small Form-factor Pluggable (SFP)
modules of various types and spectra.