Signamax 10/100/1000 to Gigabit SFP DIN Rail Mount Industrial Media Converter - Manual (Page 11)

Signamax    Gigabit SFP Hardened Media Converter
8 User’s Manual
Front Panel & LEDs
The LED indicators give you instant feedback on converter
status:
LEDs State Indication
Steady Power redundant system or ports function abnormally FAULT
Off Power redundant system and ports function normally
Steady Power on Power1
Power2
Power3
Off Power off
Steady LFS function enabled LFS
Off LFS function disabled
1000BaseSX/LX
Steady A valid network connection established for SFP port
Flashing Transmitting or receiving data
ACT stands for Activity
LINK/ACT
Off No valid network connection established for SFP port
10/100/1000BaseTX
Steady A valid network connection established for copper port
Flashing Transmitting or receiving data
ACT stands for Activity
LINK/ACT
Off No valid network connection established for copper
port
Steady Connected in full duplex mode
Flashing Collision occurred
COL stands for Collision
FDX/COL
Off Connected in half duplex mode
Steady Connected at 1000Mbps 1000
Off Not connected at 1000Mbps
Steady Connected at 100Mbps 100
Off Connected at 10Mbps