Signamax Unmanaged 10/100 Hardened PoE+ Rack Mount Industrial Switch with 2 Gigabit Ethernet Uplink Ports - Manual (Page 11)

Signamax
 Hardened PoE Ethernt Switch
User’s Manual 9
Front Panel Display
Status LEDs
LED State Indication
Power1
Power2 Steady Power on.
Off Power off.
Fault
Steady Power redundant system failure occurred.
Off Power redundant system failure is not occurred.
10/100BaseTX
Link/ACT
Steady A valid network connection established.
Flashing
Transmitting or receiving data.
ACT stands for ACTIVITY.
10/100
Steady Valid port connection at 100Mbps.
Off Valid port connection at 10Mbps.
PoE
Steady Powered device (PD) is connected.
Off Powered device (PD) is disconnected.
LED State Indication
Gigabit Ethernet
Link/ACT
Steady A valid network connection established.
Flashing
Transmitting or receiving data.
ACT stands for ACTIVITY.
TX
Steady A valid TX connection established.
Off No valid TX connection established.
SFP
Steady A valid SFP connection established.
Off No valid SFP connection established.