Signamax 10/100 to 100BaseFX SC Multimode Unmanaged Hardened Industrial DIN-rail Mount Switch - Manual (Page 3)

SIGNAMAX 065-7403HTB Unmanaged Industrial Ethernet Switch User Manual
【Mechanical design】
065-7403HTB
：
【Power input】
The lower panel of SIGNAMAX 065-7403HTB switch provides industrial terminals V- 、V+, power input is
12～36 V DC.
【Communication interface】
100BaseFX Optical port
100BaseFX full duplex fiber interface. Fiber interfaces should be used in pairs. TX is the optical sending
port, RX is the optical receiving port. The fiber interface supports dropped instructions, so that network
reliability can be improved efficiently.
10/100BaseT/TX Interface
10/100BaseT/TX Ethernet interface is on the front panel of the device. Interface type is RJ45。
【LED indicator】
LEDs on the front panel of SIGNAMAX 065-7403HTB switch show system and port working state,
so you can find and solve problems. These meanings are shown as below:
10/100BaseTX Port
Port Indicator Status Description
Green
Green On—Port works at 100Mbps
Green Off—Port works at 10Mbps
Yellow
Yellow On—data is being transmitted.
Yellow Off— data is not being transmitted.