Xtramus XG2 V1.3 - Manual (Page 22)

22
Press "Enter" key to build connection and system enter into the main windows of XG2 Console Program
You can view XG2 system information, switching XG2 modes, or upgrading XG2 firmware with XG2 Console
Program.
XG2 system information is displayed in A. Information displayed here includes: Line Loopback Mode, SL/SGL
Mode, RJ45 Cable Length, 100GBase-T Pair Polarity, SFP+ Module Vender Name, SFP+ Module Vender
PN, SFP+ Module Laser Wavelength, and Temperature.
Also, you can key in numbers/characters listed in B with your keyboard to input commands for XG2.
<1> Change Line Loopback Mode
↑↓
You can enable/disable line loop back by pressing 1 on your keyboard. For
more information, please refer to 3.1. Loopback.
<2> Change SL/SGL Mode
↑↓
You can switch the SL/SGL Mode by pressing 2 on your keyboard. SL
Mode stands for Slave Link Mode, while SGL Mode stands for Segment
Mode. Two XG2s can’t be joined if they are both under Slave Link Mode.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®