Xtramus XG2 V1.3 - Manual (Page 8)

8
XG2-5
Interface XFP to/from XFP
Port A IEEE802.3ae (10GBase-R)
Protocol
Port B IEEE802.3ae (10GBase-R)
Two 10Gbps XFP Ports
One RS-232 Console Port
Fixed Port
One Power Jack
LED Display
Link/Rx A
Link/Rx B Loopback
SYS
Please note that for network flow conversion, the media speed of two ends has to be symmetrical; otherwise, packet
loss happens during conversion. Hence, the connection speed of copper UTP port A must be 10Gbps connection,
for the conversion of 10Gbps SFP+ connection. 10M/100M/1000Mbps UTP connection is not applicable to XG2.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®