Usb smart cable, Kit contents, Supported host environments – Zilog Z16F2810 User Manual
Page 4
USB Smart Cable
User Manual
UM018114-0513
USB Smart Cable
1
USB Smart Cable
Zilog’s USB Smart Cable device, part number ZUSBSC00100ZACG,
allows you to connect Z8 Encore!
®
, Z8 Encore! XP
®
, ZNEO
®
, and
eZ80Acclaim!
®
development boards to a high-speed or full-speed USB
port on a Zilog Developer Studio II (ZDS II) host system.
This user manual provides instructions for installing USB Smart Cable
hardware and its associated drivers. When the USB Smart Cable is con-
nected and the drivers are installed, you can proceed with debugging, as
described in the development kit documentation that applies to these
development boards.
Kit Contents
The contents for the USB Smart Cable kit are:
•
USB Smart Cable
•
Six-conductor ribbon cable
•
This USB Smart Cable User Manual (UM0181)
Supported Host Environments
The supported host environments are:
•
A host PC with ZDS II v4.9.0 or later version for Z8 Encore! and
eZ80Acclaim!, or ZDS II v4.10.0 for ZNEO. For ZDS II host system
requirements, refer to the development kit quick start guide that
applies to the Zilog CPU family that you are using.
•
One USB high-speed or full-speed port on the host chassis or a pow-
ered hub. The USB Smart Cable cannot operate properly on an
unpowered hub; i.e., a hub without a separate AC adapter.