ZVOX Audio 430 - Manual (Page 3)

Power sources. The ZVOX 430 can be operated only with a
50/60HZ 120-240VAC power source.
Do not Overload Outlets. Don’t overload your wall outlets or
power strip. This can result in the risk of fire or electric shock.
Damage requiring service. Unplug your ZVOX 430 and refer
servicing to an authorized service center when the
following conditions occur:
• When the power supply cord or plug is damaged or frayed.
• If liquid is spilled into the unit.
• If the unit has been exposed to rain or water.
• If the unit does not work normally by following the operating
instructions.
• If the unit has been dropped or physically damaged.
• If the unit exhibits a distinct change in performance.
lightning. Unplug your unit during a lightning storm, or when
it is left unattended and unused for long periods of time. This
will prevent damage due to lightning and power line surges.
unplug Before Cleaning. Unplug your ZVOX system from wall
outlet or other power source before cleaning. Use a damp cloth
for cleaning. Do not use solvents or chemical cleaning agents.
attachments. Do not use any adapters or attachments not
recommended by ZVOX Audio, as they may cause hazards.
servicing. Do not attempt to service this product yourself.
Do not remove the cover. Refer all servicing to qualified
service personnel.
replacement Parts. Do not allow anyone to use replacement
parts other than those recommended by the manufacturer.
Unauthorized substitutions may result in fire, electric shock or
other hazards.
safety Check. Upon completion of any service or repair to this
product, ask the service technician to perform safety checks to
determine whether the product is in proper operating condition.
Do not use near water. Do not use your ZVOX 430 near
water, such as a bathtub, sink, swimming pool or wet basement.
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture, To avoid dripping and splashing,
no objects filled with liquids, such as vases, should be placed on
your ZVOX 430.
Object entry. Never use probes of any kind to reach into the
ZVOX 430 as they may touch voltage points or short parts that
could result in a fire or electric shock.
stable Placement. Do not place the ZVOX 430 on an unstable
cart, stand, bracket or table. The ZVOX 430 may fall, causing
serious injury to a child or adult and serious damage to the prod-
uct. Do not use the ZVOX 430 on any unstable surface.
Ventilation. The heat sink (a black metal panel located on the back
of the ZVOX 430) REQUIRES ventilation to ensure reliable operation
of the system and to prevent it from over-heating. This area must
not be blocked or covered. Do not allow a soft surface such as
carpet, bedding or a sofa to cover the heat sink. The system should
not be placed in a built-in installation such as a bookcase or a rack
unless proper ventilation is provided.
Heat. Place system away from radiators, stoves, heat vents or
other heat sources.
Do not abuse The Power Cord. Install the ZVOX 430 where no
one can step on or trip on the power cord. Never yank to disconnect
the cord from an outlet. Keep the cord away from heated surfaces.
Do not pull the cord around sharp edges or corners. Do not allow
cord to hang over the edge of table or counter.
Do not defeat the safety purpose of the polarized or grounding
type plug. A polarized plug has two blades with one wider than the
other. The wide blade is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Power supply. Do not use a power supply with a higher voltage
rating than the unit supplied.
The exclamation point within an equilateral triangle is
intended to alert the user of the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying this product.
reaD THIs FIrsT
Important safety Instructions For ZVOX 430 system
Read and Heed impoRtant safety waRning on poweR supply.
CauTIOn
RISK OF ELECTRICAL SHOCK,DRy LOCATION USE ONLy
aTTenTIOn
POUR UTILISATION A L’INTERIEUR
Installation and Operating Instructions:
ZVOX ® 430 single-Cabinet surround sound system
Contents
ZVOX Audio 430 cabinet
External Power Supply with 19 VDC output
AC power cord for External Power Supply
Remote Control and Battery
Audio Cable (left and right RCA type plugs on each end)
Placement
A Place the ZVOX 430 cabinet on a sturdy surface.
B Mount the ZVOX 430 cabinet to a wall using optional wall-mount
bracket hardware (available separately). An installation guide is
supplied with the bracket. The plastic feet on the bottom of the 430
cabinet can be removed by carefully prying them off with a dull blade.
Notes:
• The 430 cabinet should face the listening area. Try to align the cabinet
with the center of the TV screen.
• The threaded inserts on the back of the ZVOX 430 have 6mm metric
threads.
Power Connection
1 Connect the Power Supply’s 19VDC plug to the POWER 19VDC jack
on the back of the ZVOX 430 cabinet.
2 After you have confirmed the Power Supply is properly connected to
ZVOX 430, connect the AC power cord to the the Power Supply, then
plug it into a convenient AC receptacle. Don’t connect the Power Sup-
ply to an AC receptacle before connecting the Power Supply output to
the back of the ZVOX 430.
audio signal Connection
1 Connect one end of the Audio Cable to the “Audio Out” jacks of your
TV or other audio source (cable box, satellite receiver, DVD player). Use
the red plug for the red jack (right channel). Use the other plug for the
white jack (left channel).
2 Connect the red and white plugs on the other end of the Audio Cable
to the red and white INPUT 1 jacks on the back of the 430 cabinet.
Turn Off Your TV’s Internal speakers
1 Push the MENU button on the TV’s remote control and navigate to the
AUDIO setting options.
2 Choose SPEAKER: OFF (the wording may vary).
3 If available, set AUDIO OUT choice to VARIABLE (the wording may
vary). This is sometimes labeled AOV. Some TVs do not provide this
option. The audio output will either be FIXED or VARIABLE.
Note: Variable audio output on your TV allows you to continue to use your
TV’s remote control to adjust the listening volume. A headphone output,
if available, can often be used as a variable audio output with a suitable
connection cable. If your TV’s audio output is fixed, then use the ZVOX 430’s
remote control.
Note: A universal or programmable/learning remote can be substituted
to control the 430, your TV and other connected devices. The ZVOX 430
will respond to the following preprogrammed audio remote codes: Candle
1004/Hisense 1237/Aiwa 1036.
ZVOX 430 Connectors
INPUT 1 jacks: Use to connect a TV, PC or other audio source
INPUT 2 jacks: Use this input only after INPUT 1 has an audio source.
Audio on this input mixes with the audio from INPUT 1.
OUTPUT: The output of this jack is full range monaural audio. It can be
connected to an external powered subwoofer, should one be available. If
possible, set the subwoofer’s crossover (sometimes labeled “Low Pass”) to
90 Hz, then adjust the subwoofer’s output to blend well with the ZVOX 430.
remote Control
Insert the AAA batteries into the remote control.
Turn on the ZVOX 430 by pushing the POWER button on the remote
control. A blue light should appear on the front of the ZVOX 430.
Operating the ZVOX 430
The ZVOX remote control has “+” and “-” buttons to control four ranges.
VOLUME | SUBWOOFER | TREBLE | PHASECUE
The blue light on the speaker will blink with each adjustment step up or
down. It will stop blinking when the maximum or minimum setting has
been reached.
1 VOLUME: IF yOUR AUDIO SOURCE
HAS A VARIABLE LEVEL OUTPUT:
First, set the volume on the TV (or other
audio source) to about 3/4 of its full range.
Then adjust the ZVOX 430 remote’s
VOLUME buttons until the output is as
loud as you require. From this point
forward, use the TV remote to control
the volume. Use the ZVOX remote as
required to adjust the remaining qualities
(Subwoofer, Treble and PhaseCue).
IF yOUR AUDIO SOURCE HAS A FIXED
LEVEL OUTPUT: Adjust the ZVOX 430
remote’s VOLUME buttons as desired.
When the MUTE button is pushed, the
speaker output is silenced and a blue
light will blink until output is restored
with another press of the MUTE button.
2 SUBWOOFER: Adjust the bass output
of the ZVOX 430 as desired. The control
has nine steps. Most users will find a single
setting that works for most audio programs.
3 TREBLE: Adjust as desired. Nine
adjustment steps are available and the
difference between each step is small.
Most users will find a single setting that
works for most audio programs.
4 PHASECUE: Adjust the level of virtual
surround with these two buttons. As you
increase the PhaseCue level, the apparent soundfield will expand well
beyond the left and right of the ZVOX 430. The effect is most obvious
with DVD movies and live action TV programming. News broadcasts,
talk shows and sitcoms do not have much stereo content. PhaseCue
may have little or no effect on these programs.
Note: If you find that crowd noise or movie special effects are
“drowning out” the dialog, try turning down the PhaseCue level.
This will restore clarity to dialog.
Audio
Output
Rear jack panel of tV
Rear input panel of ZVoX 430
1-Year limited warranty
To the original purchaser, ZVOX Audio will warrant the ZVOX 430 system
to be free of defects in material and workmanship for a period of one (1)
year from date of purchase. With respect to defects, ZVOX will, at
its option, replace the product or repair the defect in the product with
no charge to the original purchaser for parts or labor. Customer is
responsible for shipping charges where required.
This warranty does not extend to any defect, malfunction or failure
caused by misuses, abuse, accident, faulty hookup, defective
associated equipment or use of the system with equipment for which
it is not intended.
This warranty is only valid when the system is returned to the retailer that
sold the ZVOX 430 system to the original purchaser.
This is the sole and express warranty. This warranty is in lieu of all other
warranties, expressed or implied, of merchantability, fitness for purpose or
otherwise. In no event shall ZVOX Audio LLC be liable for incidental or con-
sequential damages or have any liability with respect to defects other than
the obligations set forth as stated. Except as provided herein, ZVOX Audio
LLC shall have no liability or responsibility to the purchaser or any other
person or entity with respect to any liability, loss or damage caused directly
or indirectly by use of the product, including, but not limited to,
any incidental or consequential damages.
To ensure warranty coverage, it is incumbent upon the original purchaser
of the ZVOX 430 system to inform the retailer of the defect within the
warranty period. The only acceptable method of establishing warranty
status is a copy of the original proof of purchase indicating customer’s
name and purchase date.
all safety and operating instructions should be read before
your ZVOX ® 430 is operated. safety instructions and operating
instructions should be kept for future reference. all warnings on
the product or in the operating instructions should be followed.
Operate your ZVOX 430 in accordance with the instructions.
Output Input 2 Input 1
19VDC
3.15A
Power
Right
Left
Output Input 2 Input 1
19VDC
3.15A
Power
Right
Left
Rear input panel of ZVoX 430
R
L