Zytronic ZXY200 - Manual (Page 18)

Integration Manual - Issue 1 Zytronic Projected Capacitive ZXY200/300 ® Multi Touch Controller & Sensor 18
ZIF CONNECTOR LOCKING BAR IN UNLOCKED AND LOCKED POSITIONS
Further bends and tape can be applied to the flexible cables to position them securely, as shown in
Figure 18. Some bends, such as those next to the two ZIF connectors, may be better without creasing.
Avoid trying to crease the flexible cable within 5mm of the stiffener at the ZIF end.
FURTHER BENDS AND TAPE APPLIED TO THE FLEXIBLE CABLES
The flexible cables can be doubled back on themselves, creased, and taped down in the straight
sections to take up any additional length, as shown in Figure 19.
FIGURE 17
FIGURE 18