Zytronic ZXY200 - Manual (Page 21)

Integration Manual - Issue 1 Zytronic Projected Capacitive ZXY200/300 ® Multi Touch Controller & Sensor 21
POWER AND DATA CONNECTIONS
A USB cable should be connected to the mini-B socket on the controller PCB, as shown in Figure 20.
USB CABLE PLUGGED INTO CONTROLLER PCB
Care should be taken when inserting the USB connector into the socket to avoid damage or lifting of
the USB connector from the PCB, as shown in Figure 21.
CORRECT AND INCORRECT USB CABLE INSERTION INTO USB MINI-B SOCKET
A regulated 12V ±5%, minimum 100mA power supply should be connected to the 2.1mm DC power
socket (central pin +12V) on the controller PCB, as shown in Figure 22.
FIGURE 20
FIGURE 21