Zytronic ZXY200 - Manual (Page 23)

Integration Manual - Issue 1 Zytronic Projected Capacitive ZXY200/300 ® Multi Touch Controller & Sensor 23
USB AND POWER CABLES HELD IN PLACE
Adding cable clips similar to those shown in Figure 25 will reduce the risk of damage occurring to the
controller PCB connectors if the cables are accidentally pulled. If adhesive pads are used on the clips, it
must be ensured that they will maintain their adhesion at any temperature that they may be subjected
to in service.
CABLE CLIPS HOLDING CABLES IN PLACE
The LCD video and power connections should be connected to the LCD, as shown in Figure 26, and to
the PC and power sockets.
FIGURE 24
FIGURE 25