Adept T20 Pendant - Manual (Page 41)

3.13 Displaying and Clearing Errors
NOTE: In the preceding screen, the PgUp and PgDn soft keys are grey, rather than
blue, because there is only one screen available for digital outputs, so page up and
page down are not available.
3.13 Displaying and Clearing Errors
When errors occur, the ERR LED lights and a screen describing the error is displayed. Press
OK or Cancel to clear the error information.
While the error screen is displayed, the Menu button, arrow buttons, and soft keys are dis-
abled. Even though the soft keys remain blue, they are not active in this state.
Figure 3-21. Error Screen
In order for these errors to be displayed, the Pendant Msgs must be Enabled, from the System
Maintenance screen.
NOTE: If the pendant ever loses contact with the controller, the pendant will dis-
play the Connection Lost screen. From this screen, you will be prompted to recon-
nect with the controller. This message is not affected by the Pendant Msgs setting.
You can display a list of errors that have occurred since the pendant was last powered up. For
details, see Displaying Recent Errors on page 47.
Adept T20 Pendant User's Guide, Rev. C
Page 41 of 56