Adtec digital DTA-3050 (version 6.02.14) Manual - Manual (Page 23)

Front-Panel-Only Control Options
The following Settings and Features are only available from the front panel of the DTA3050- there is no GUI support for these
features:
1.“Audio Format”.
Set to DVB for audio type 6 •
Set to ATSC for audio type 0x81 •
2.Transport stream ID “PAT Tran Strm ID”
3.Resetting the unit.
Press and hold the "Mode", "Escape", and "Right Arrow" buttons simultaneously, then release them all to affect a
reset. •
4.MPE routes.
5.Logging
6.“SAP IP address”
7.Backup and Restore configurations.
8.Enable / Disable auto logout.
19 Getting Started