AMETEK ReFlex Mating Connnectors for Controller User Manual
Purpose, Mating connector kit
Technical Note
ReFlex Power™ Mating Connectors for Controller Module
Document No. W380269-01 Rev F •
1/26/2009
©2008 AMETEK Programmable Power, Inc. • All rights reserved. • AMETEK is a trademark of AMETEK, Inc.
9250 Brown Deer Road, San Diego CA 92121 • Tel: 858-450-0085 • Fax: 858-458-0267 • email:
• Web:
www.programmablepower.com
1 of 3
PURPOSE
Provide mating connector information for the ReFlex Power™ Controller module.
Figure 1. ReFlex Power™ Controller Front Panel
MATING CONNECTOR KIT
ReFlex Power™ Controller (RFPC) Mating Connector Kit - AMETEK Part No. 5380269-01, mates with RFP-C1LAN-0000-XXXX,
and includes the following:
Bill of Material
Item
AMETEK
Part No.
Description Qty
Manufacturer
Part No.
Manufacturer Suggested
Source(s)
1
856-993-07
Plug, RJ45, ¼ Turn, 26482, NI
1 RJF6MN
Amphenol Socapex
PEI-Genesis:
http://www.pei-genesis.com/
Arrow Electronics:
http://www.arrownac.com/
2 856-918-15
Conn, 15P, DSUB, 20AWG,
Crimp, Male
1 SD15M1000Z Positronic
Industries
Positronic Ind.
http://www.connectpositronic.com/default.cfm
3 856-975-16
Conn,
Backshell,
15P
1 D15000Z00
Positronic
Industries
Positronic Ind.
http://www.connectpositronic.com/default.cfm
RECOMMENDED TOOLS (NOT INCLUDED WITH MATING CONNECTOR KIT)
Hand crimp: Positronic Industries P/N 9507-0-0-0
Pneumatic crimp: Positronic Industries P/N 9550-1-0
Insertion/extraction: Positronic Industries P/N M81969/1-02