AMETEK LPDC-16V - Manual

Technical Note
ReFlex Power™ Mating Connectors for LPDC-16V Module
Document No. W380270-01 Rev E • 1/23/2009
©2008 AMETEK Programmable Power, Inc. • All rights reserved. • AMETEK is a trademark of AMETEK, Inc.
9250 Brown Deer Road, San Diego CA 92121 • Tel: 858-450-0085 • Fax: 858-458-0267 • email: [email protected] • Web: www.programmablepower.com 1 of 4
PURPOSE
Provide mating connector information for the ReFlex Power™ Low Power DC, 16V (LPDC-16V) module.
Figure 1. LPDC-16 Front View
MATING CONNECTOR KIT
LPDC-16V Mating Connector Kit - AMETEK Part No. 5380270-01, mates with RFP-D1016-021-XXXX, and includes the following
for both Interface and DC output connectors:
Bill of Material
Item
AMETEK
Part No.
Description Qty
Manufacturer
Part No.
Manufacturer Suggested Source(s)
1 856-214-07
Conn, 13P, DSUB, 8/20AWG,
Male
1 CBD13W6M2000Z Positronic Industries
Positronic Ind.
http://www.connectpositronic.com/
default.cfm
2 856-745-51
Contact, 10AWG, 30A, CL ETRY,
Male
4 MC4010D Positronic Industries
Positronic Ind.
http://www.connectpositronic.com/
default.cfm
3 856-247-39 Conn, Backshell, 37P, Strt, 2 PC 1 D37000Z00 Positronic Industries
Positronic Ind.
http://www.connectpositronic.com/
default.cfm
4 856-214-09
Conn, 9P, DSUB, 20-24AWG,
Crimp, Male
1 SD9M1000Z Positronic Industries
Positronic Ind.
http://www.connectpositronic.com/
default.cfm
5 856-247-10 Conn, Backshell, 9P, DSUB, 2 PC 1 D9000Z00 Positronic Industries
Positronic Ind.
http://www.connectpositronic.com/
default.cfm