Analog Way AW VIDEOCOMPOSITOR - LIVECORE PLATFORM - Ref. AWVDC Smart Graphics module - Manual (Page 3)

2
Installation
To install the package, follow these steps:

Make sure the Crestron VTPro-e application is not running. Launch VideoCompositor_setup.exe
program and follow the installation instructions.

Launch VTPro-e and create a new program.

Display VTPro-e’s smart graphics control browser.

Look for “Technidream” category, you should find the new module in there.

Drag and drop the module on your panel and customize it.
Usage

First of all, define the two “ System message joins ” to connect the module with Analog Way driver.

Define the main screen (output) resolution as any layer position and size will be calculated from
these values. E.g.:
Target virtual width = 1920 Target virtual height = 1080

Define the number of sources that will be used in your application, and provide them logo, name,
and snapshot HTTP URL if available.
For LiveCore™ devices, the default URL is http://IPaddress/assets/Snapshots/capture_in_x.bmp
(where x is the input number).

Define the number of layers available and provide to each of them, the name and join numbers
considering your application requirements. You might not need to set all the join signals.

Define if necessary join numbers for optional features such as Disable source join, Disable user edit
join.

Once the module is properly configured, compile and enjoy your new compositing application.
Figure 1: Style customization in VTPro-e