Anthony Gallo Strada - Manual (Page 11)

Installation
Breaking in Your Stradas
Your new Strada loudspeakers require a short period of time (a “break-in” period) to
develop their full sound potential. The break-in period requries approximately 50 hours,
although you can expect to hear a marked increase in both low and high frequency
performance within the first 20 hours. You will likely experiment with placement of your
loudspeakers (in particular, proximity of the speakers to walls and placement of the
subwoofer) during the break-in period.
You are encouraged to walk about the listening space during the break-in period and
listen for consistency between highs and lows. Slight changes in the position of the
subwoofer, for example, can have a dramatic impact on the overall sound of the system
and will likely enable you to eliminate "bumps" of either high or low frequency.
Unpacking and Inspection
Each Strada and its accompanying Owners’ Manual are packaged together in a single
carton.
Note: If you purchased a floor mount, table stand, or a wall mount for your Strada,
these will be packaged in a sparate carton. Instructions for assembling and installing
these items will be included in their carton.
Carefully inspect your Strada immediately after unpacking it. If you note any damage,
please contact your dealer. Do not install or use your Strada if it appears to be damaged.
7
Specifications
Frequency Response 45 Hz – 20 kHz ±3 dB (in room with boundary reinforcement;
loudspeakers within 1 foot of wall.
Impedance 8 ohms nominal.
Sensitivity 87 dB at 1 watt and 1 meter.
Power Handling 150 watts RMS unclipped music power. Minimum suggested
power 10 watts RMS.
Tweeter Patented CDT3 (Cylindrical Diaphragm Transducer), sporting
180° (for the side configuration) or 120° horizontal dispersion
(for the center configuration) from 3 kHz to above 20 kHz.
Woofers Two 4-inch dynamic hyperbolic carbon fiber drivers optimized
to integrate seamlessly with the CDT3 tweeter without the
need for a crossover.
Enclosure Type Sealed, with auxiliary bass cavity supplementation and
patented S2 loading.
Enclosure Composition Powder-coated cast aluminum chassis, with brushed stainless
steel spheres and powder-coated stainless steel grills.
Dimensions Width: 5.0 in. (12.7 cm)
Height: 13.5 in. (34.3 cm)
Depth: 7.5 in. (19.1 cm)
Connections 5-way gold-plated binding posts developed specifically for
Anthony Gallo Acoustics
Weight 11.4 lbs. (5.2 kg)
Finishes Brushed stainless steel spheres with with a black frame or an
all-black finish.
Warranty One year parts and labor. Five years if product is registered
within 60 days of purchase and with all documentation.*
* Documentation is necessary for us to determine the purchase authenticity of all Gallo products.
There are no authorized online retailers other than “Gallo Direct.com” for Anthony Gallo
products, and there will be no support or warranty for products purchased anywhere else online.
6