Argox OS-2130D - Manual (Page 23)

32
OS-2130D & OS-2130DE User’s Manual
Installing a Printer Driver (for other interfaces except USB)
1. Turn off the printer. Plug the power cable into the power
socket on the wall, and then connect the other end of the
cable to printer's power socket. Connect the Parallel cable,
Serial cable, or Ethernet cable to the proper port on the printer
and on your computer.
2. Prepare the documentation and software CD-Rom from
printer package and then install to CD-Rom drive of your
computer. The CD-Rom will bring out the following prompt.
Click “Go”:
33
OS-2130D & OS-2130DE User’s Manual
3. Under OS-2130D/ OS-2130DE product selection prompt,
choose Seagull Driver version and then start installation:
Instead of the flash prompt above, another way to install
Seagull driver is to run the DriverWizard utility from the
Installation Directory where the Seagull driver files are located.