Stand-alone with keyboard – Argox X Series User Manual
Page 101
101
Stand-alone with Keyboard
This section covers stand-alone operation with keyboard. It is
applicable with printer models:
Argokee
PS/2
Keyboard
Printer
Language
PPLA
PPLB
Basic
PPLB only
Model
X-1000VL
X-2000V
X-2300
X-2300Z
X-3200
X-2300E
X-3200E
X-1000VL
X-2000V
X-2300
X-2300Z
X-3200
X-2300E
X-3200E
All
models
X-2000V
X-2300
X-3200
X-2300E
X-3200E
To use the printer in stand-alone operation with a keyboard follow
the procedure described below:
1.
Make a form for the keyboard. (The form should include
“ZS” command to store to flash memory. Refer to the
following command sample.)
2. Turn on the printer; download the form from PC to printer.
3. Turn off the printer.
4. Connect the keyboard to the keyboard interface.
5. Turn on the printer.
6. Check LCD for instructions of each data string/ label count/
copies; type to input data accordingly.